04/09/2005
Waterless Car Wash
launched in Hertfordshire
04/09/2005
Waterless Car
Detailers open in Hertfordshire
The Granary
Redwell Wood Farm
Ridge
Hertfordshire
EN6 3NA
0845 456 4653
E-Mail Us Here
Join
our mailing list
FREE
TECHNICAL SUPPORT
Is
it Really Waterless ?
Yes!
Really,
really waterless?
Yes!
What
are its limitations?
It
will clean the dirtiest of cars, but there are varying
levels of dirt! A general rule, if you can't see the
bodywork through the dirt, its too dirty. Not many cars
get that dirty through normal use.
|
Redline
Magazine...
"There's loads of technical jargon about how Ultra-Ion™
works, but what's most important is how well it works, removing
even dried bird droppings!
It lasts for ages, makes cleaning a car a doddle, and is
perfect for buffing your motor to a brilliant shine"
Robert Crossland, Smart Shine..."I'm a professional
valeter and found Ultra-Ion™ to be very effective and
easy-to-use. It means I can dispense with having to use
a variety of other products, clean cars more quickly, and
get fantastic results" |
|
|
Waterless
Car Wash Products Frequently Asked Questions.
| What
is it? |
Ultra-Ion™
is a revolutionary treatment than advances car cleaning
into the 21st Century. It replaces the process of
washing (water, shampoo, drying) and waxing (polish,
protecting) into a simple and economical "spray-wipe-buff"
application
|
| What
can I use it on? |
Bodywork,
glass and wheels. It can also be used on aircraft,
boats, caravans, motorcycles and almost any hard sealed
surface.
|
| How
does it work ? |
As
you spray the formula on, dirt, grime, insects and
bird droppings are broken down and suspended in microscopic
capsules (this prevents scratching). As you wipe these
away, a blend of high quality polymers and an ionic
compound bond with the surface to leave a deep shine
and tough protective barrier.
|
| Can
it scratch ? |
No,
it actually creates a safer system for dirt removal
than soapy water and a sponge!
|
| How
dirty is dirty? |
Always
use common sense. Wash areas if you feel they are
excessively dirty (you can't see the surface) or there
is heavy tree sap. |
|
How
often can it be used ?
|
As
often as you like or to replace a normal wash. |
| What
about the environment? |
You
won't waste water (a hosepipe can use up to 10 litres
per minute) and effluents from shampoo and other products
won't enter the eco-system.
|
| How
long will a bottle last? |
A
1 Litre bottle will clean up to 16 "mid-size"
cars, although several factors will dictate this;
size of car, amount used (more or less than recommended),
ambient conditions. Etc.
|
| How
long will it take ? |
This
depends on vehicle size and how fast you work! A complete
clean (bodywork, glass and wheels) should take 25-45
minutes.
|
| Can
it be applied to a wet surface ? |
No,
dry the surface before application. If it comes into
contact with water it may streak (remove by buffing
once the surface has dried).
|
|
What
if the weather is bad?
|
Normally
you won't be creating any mess/water spill, so you
can work in a garage or covered area. |
| Can
it be used on all finishes ? |
Yes,
but follow manufacturers instructions for new finishes,
which generally recommend a 90 day period before applying
any product.
|
| Whar
does it contain? |
Over
45 ingredients including emulsifiers, lubricants,
wetting and cleaning agents and PolyGuard-3™
(a unique series of high quality polymers). It does
not contain synthetic or organic wax, silicone or
Teflon.
|
| How
does it compare to traditional waxes, polishes and
sealants? |
Ultra-Ion™
contains a blend of high quality polymers (see above)
that replace traditional waxes, polishes and paint
sealants: Waxes: offer a good level of surface protection,
but can leave the paint looking dull after a period
of time. Polishes: are great at revitalising dull
paint and removing minor blemishes, but are often
abrasive and provide little protection. Paint Sealants:
protect very well but don't clean or polish.
|
| How
to Use |
Follow
detailed instructions sent with the product before
use.1. Lightly mist a manageable area of bodywork
using sweeping strokes. Don't soak the surface! 2.
With a terry cloth wipe in a circular motion until
a haze develops. Don't buff the haze. 3. Use a polishing
or clean terry cloth and buff the haze. 4. Repeat
this procedure for the rest of the bodywork and glass.4.
Use your terry application cloth and wipe wheels,
door, boot, engine surrounds and wiper blade rubbers.
Buff as normal.
|
Further
information on other waterless car valet products
For
Further Information Call Peter on
079 039 20 20 7
|
|
|
